Custom Gates and Automatic Gate Systems in Dallas-Fort Worth
Star Gate & Fence engineers custom driveway gates and commercial access systems across the DFW Metroplex. We fabricate heavy iron panels, install automated electric operators, and wire advanced access control hardware. Our direct employees manage every phase of the gate build entirely in-house. We absolutely never use outside subcontractors. One single licensed contractor manages your structural welding, concrete pouring, and intricate electrical wiring.
Complete Gate Services Under One Unified Contract
We manage your heavy gate installation and electrical automation directly without overlapping outside trades.
A reliable driveway gate requires perfect coordination between structural framing and electrical mechanics. We synthesize these distinct phases into one clean, manageable project. If you need a heavy cantilever slide gate for a commercial perimeter, we handle it. If you need a decorative swing gate for a residential estate, we fabricate it. Our direct employees pour the exact concrete pads required for your specific operator motor.
Custom Iron Gate Fabrication and Installation
We build your custom gate from raw structural steel directly in our local shop.
Standard catalog gate panels rarely fit custom masonry columns properly. We measure your exact driveway slope and fabricate a heavy iron gate to fit perfectly. Our in-house welders grind every joint smooth and apply premium powder coating. This heat-cured finish survives brutal Texas UV exposure far better than standard liquid paint.
Automatic Gate Systems and Motor Operators
We match the electric motor exactly to your panel weight and driveway grade.
An undersized motor burns out rapidly when pushing heavy iron daily. We evaluate your specific traffic cycle before recommending any hardware. We install heavy-duty operators from LiftMaster, Nice Apollo, USAutomatic, and DoorKing. Whether your sloped driveway requires an underground ram or a V-track slider, we install it.
Swing Gates vs. Sliding Gates: Driveway Engineering
Your physical driveway space and specific concrete slope dictate the correct gate style.
Not every property can safely support a traditional swinging gate. Narrow urban lots in Dallas often lack the wide turning radius a heavy swing gate demands. If your driveway slopes steeply upward, a swing gate might drag heavily against the concrete. We bypass these physical space limitations by installing V-track and heavy cantilever sliding gates. Sliding panels travel laterally along your existing fence line, keeping the driveway completely clear.
Gate Access Control and Intercom Systems
We install smart intercoms and keypads based specifically on your exact daily traffic.
Controlling who enters your property matters just as much as the physical barrier. We wire telephone entry systems for large HOA communities in Frisco and Plano. We also install secure residential keypads and cellular modules for rural properties lacking reliable Wi-Fi.
Root-Cause Gate Diagnostics and Motor Repair
We locate the exact mechanical fault before suggesting expensive total motor replacements.
Founder Elia Amiel built our reputation on absolute diagnostic integrity. Our technicians physically test motherboards, travel limit switches, and system voltage limits. We fix magnetic sensing loops and tune motors instead of blindly swapping expensive parts. If your motor requires a simple capacitor, that is exactly what we replace.
24/7 Emergency Storm Triage and Recovery
We deploy direct crews immediately to secure your perimeter after severe North Texas weather.
Violent May storms generate massive power surges that destroy gate control boards instantly. High winds frequently snap heavy wood panels and twist iron hinges. We actively manage an emergency waitlist to secure compromised properties fast.
Engineered for North Texas Soil and Weather
Our structural installations actively combat expanding clay soil and violent spring wind loads.
The DFW Metroplex sits directly on highly expansive black clay soil. This earth swells violently during spring rains and shrinks rapidly in the August heat. A gate post set in shallow concrete will quickly lean under these aggressive geological cycles. Our direct employees pour massive concrete footings utilizing the strict one-third depth rule. A heavy iron gate post requires a deeply anchored base to prevent eventual dragging.
Strict Adherence to International Safety Standards
We engineer every gate strictly following ASTM F2200 and UL 325 safety codes.
An automated heavy gate is a dangerous piece of moving machinery. We build physical gate panels to meet ASTM F2200 geometric safety standards. We restrict slide gate gaps to under 2.25 inches to prevent reach-through entrapment hazards. For the electrical operator, we enforce UL 325 monitoring requirements perfectly. We install non-contact photoelectric eyes and active edge sensors. If a sensor malfunctions, the motor legally refuses to move.
Managing HOA and Municipal Gate Permitting
We navigate strict city electrical permits and complex HOA architectural reviews for you directly.
Installing a motorized driveway gate requires navigating strict local building codes. Dallas, Fort Worth, and Plano strictly require electrical permits for hardwired gate operators. We operate as your fully licensed contractor of record to pull these permits directly. We also prepare the exact documentation your strict HOA Architectural Review Committee demands. We provide your material specs, proposed hardware diagrams, and our active contractor credentials.
Financing and Structural Workmanship Warranties
We back our custom fabrication and physical installation work with straightforward, honest structural warranties.
Because we control the entire process without subcontractors, we fully control the final quality. We offer flexible financing options to help you manage high-ticket outdoor construction projects comfortably. If a mechanical gate issue or structural settling problem occurs later, you call us directly. We dispatch our own team to make it right immediately.
The Star Gate Installation Sequence
Our direct employees execute a highly structured sequence to protect your outdoor investment.
We start by assessing your physical property and mapping the required electrical trenching. We call 811 to locate underground utilities before we ever break ground. Next, our crew digs deep post holes and pours the heavy concrete operator pads. We mount the custom gate panels and verify perfect plumb alignment. Finally, we program your access keypads and test all safety reverse functions under active power.
Gate Service Across the DFW Metroplex
We dispatch direct crews to secure properties throughout all major North Texas suburbs.
Star Gate & Fence operates without geographic restrictions inside the DFW area. We serve commercial facilities, HOA communities, and residential homeowners across all 13 counties. Our trucks run daily to Dallas, Fort Worth, Plano, Frisco, and Arlington. We also manage installations across Irving, Garland, McKinney, and Southlake.
Start Your Custom Gate Project Today
Call our local team to schedule your detailed physical driveway assessment right now.
Contact us at 469-778-0871 or email info@stargateandfence.com to start your project. Tell us your city and describe what you need built or repaired. We will follow up quickly to confirm our availability and schedule a detailed site visit. If you are experiencing a severe electrical gate failure, mention it for priority emergency triage.
Frequently Asked Questions About DFW Automatic Gates
Find direct answers regarding local gate construction, municipal permits, and structural engineering requirements.
Do you use subcontractors to build custom gates?
Every gate project is executed exclusively by direct Star Gate & Fence technical employees.
We absolutely never hire outside subcontractors. Our trained, in-house team handles the concrete, welding, and intricate electrical wiring directly.
Should I choose a sliding or swinging driveway gate?
Your physical driveway space and specific concrete slope dictate the correct gate style.
A sliding gate works perfectly on narrow urban lots lacking the clearance for a wide swing arc. We assess your physical driveway grade before recommending the safest mechanical option.
Do I need a city permit for a new driveway gate?
Most Dallas-Fort Worth municipalities require specific electrical permits for hardwired automatic gate operators.
Dallas, Fort Worth, and Plano strictly require building and electrical permits for automated entries. We operate as your licensed contractor of record to pull these municipal permits directly.
Why does my gate open but refuse to close?
This specific mechanical behavior almost always indicates a blocked or misaligned safety sensor.
UL 325 safety codes require the motor to halt if the photoelectric eye beam breaks. We test and realign these external sensors to restore your safe property access fast.