Projects / Plano, TX 75093
Electric Gate Repair and LA500 Operator Install in Plano
A service call on an arched ornamental iron entry gate in Plano, diagnosed on site and brought back into operation with a LiftMaster LA500 linear operator.
- Location Plano, TX 75093
- Scope Electric gate repair + new operator
- Gate Arched ornamental iron
- Operator LiftMaster LA500
Diagnose the gate before quoting the parts
Every repair we take starts the same way: on site, with the gate in front of us, testing what actually failed. A gate that will not move can be a dead board, a tired capacitor, a sensor out of alignment, or a panel that has shifted far enough to load the operator past what it was built for. Quoting parts before that is guesswork, and it is how owners end up paying twice. Our diagnostic process is set out on the electric gate repair page.
It also decides the bigger question: repair or replace. Sometimes a single component brings a system back for very little money; sometimes the honest answer is that an obsolete unit is not worth another round of parts. We walk through how we make that call in our guide to repair versus replacement.
Heavy arched iron, worth keeping
This is a substantial pair of leaves: a full arch across the opening, scrolled infill, and real weight behind every swing. Gates like this are worth restoring rather than replacing, and the ironwork itself was sound. What they demand is hardware sized honestly to the panel, because the load never gets lighter over time.
Weight is also what wears out an undersized system. A motor fighting a heavy leaf runs hot, draws more current than it should, and takes the hinge side with it as the panel drops out of alignment. Our approach to fabricating and repairing heavy iron is on the iron and metal page.
A LiftMaster LA500 matched to the panel weight
We fitted a LiftMaster LA500 linear operator, a step up in capacity from the lighter residential units and the right class for arched iron leaves of this size. Sizing the operator to the actual panel, rather than to the price point, is the difference between a system that lasts and a repeat call in eighteen months.
Before leaving, our technician set the travel limits, tested the safety reversal, and confirmed the gate cycled cleanly through its full arc. Every automated gate we work on is left compliant with the UL 325 monitoring rules, including the entrapment sensors described on our automatic gate systems page. If a gate fails outside normal hours, our emergency gate repair line covers the same triage.
Operator fittedLiftMaster LA 500
- Type Swinging
- Max weight 850 lbs
- Max length 18 feet
- Duty High cycle
The heaviest linear actuator in the residential range, specified here for arched iron leaves that a lighter unit would struggle to hold.
All LiftMaster operators we install →Plano project photos
On-site diagnosis, the arched iron leaves, and the LA500 operator going in at the post.
Services and guides behind this build
Gate stopped working in Plano?
Tell us your operator brand and what the gate is doing, and we will bring the right parts. Our technicians diagnose on site and tell you honestly what failed before any work starts.