Gate Installation in Dallas–Fort Worth
Star Gate & Fence installs driveway and pedestrian gates for homes and commercial properties across Dallas–Fort Worth. Our projects include sliding gates with wood infill, steel swing gates, automated driveway entrances, and custom pedestrian gates.
The right layout depends on your opening, the space available for the gate to move, and how people use the entrance. We assess those details before recommending the gate, supports, hardware, and any automation.
Choose a gate that fits the entrance
Start with movement and access, then choose the appearance. A gate needs room to open fully while leaving a workable route for vehicles and people.
Sliding driveway gates
A sliding gate moves across the opening and continues alongside it. That makes the space beside the driveway part of the installation: the gate needs a clear travel path, suitable supports, and room for its operating hardware. Walls, planting, parking spaces, and separate walk gates can all affect the layout.
For more on this option, see our sliding gate installation service.
Swing gates
A swing gate opens around hinges, using a single leaf or a pair of leaves. We consider the full opening arc, driveway slope, parked vehicles, and nearby structures. The hinge supports and mounting positions need to suit the gate they carry.
If you are comparing the two layouts, our sliding versus swing gate guide explains the space each requires.
Pedestrian and side-entry gates
A walk gate provides an entrance for people on foot. It may sit within a fence line, between masonry columns, or beside a vehicle gate. We consider the opening, hinge arrangement, latch or access hardware, and how the walking route relates to the rest of the entrance.
For commercial properties, tell us who uses the entrance and how it needs to operate during business hours and after closing.
Wood, steel, and a design that works with your fence
Our installations include steel picket gates, horizontal steel slats, and wood-faced gates with metal framing. The choice affects privacy, appearance, weight, finish care, and the hardware the gate needs.
A wood-faced gate can continue the lines of an existing wood fence. An open steel design provides a different balance of visibility and enclosure. We discuss the frame, infill, supports, and finish as parts of the same installation.
If the project includes a new fence, our wood fence installation and iron and metal fencing services cover the adjoining boundary.
Plan automation and entry controls with the gate
An automatic gate needs more than an opener attached to a panel. Gate movement, panel dimensions and weight, expected use, power, and safety devices all affect the equipment and layout.
We assess those requirements together. Tell us whether the entrance serves a household, tenants, employees, deliveries, or visitors, and whether you want remotes, a keypad, an intercom, or another way to authorize entry.
Our automatic gate systems service covers the operating equipment. Our gate access control service covers entry devices. Planning them with the gate helps identify mounting space and wiring needs before installation.
Gate installations around DFW
These local projects show how the gate design, movement, and entry hardware change with the property.
Wood sliding gate and horizontal fence in McKinney
We installed a sliding driveway gate with horizontal wood infill and dark metal framing, alongside a matching horizontal fence. The project included a LiftMaster SL 3000 gate opener.
Steel swing gate with a magnetic lock in Carrollton
A horizontal-slat steel gate was fitted into a cedar fence line, with a surface-mounted magnetic lock. The gate and adjoining fence use a coordinated horizontal design.
Iron swing gate and automation in Dallas
This Oak Cliff driveway project combined a steel picket swing gate with LiftMaster LA400 automation. The gate closes the side driveway between the house and the property boundary.
Pedestrian gates for a Dallas hotel entrance
We fabricated and installed horizontal-slat steel pedestrian gates within existing stone masonry openings. The project focused on fitting the gates to the commercial entrance and its facade.
What we assess before installation
- The entrance and its use. We measure the opening and review the approach, gate travel, walking route, and access needed for everyday vehicles and deliveries.
- Existing site conditions. Posts, columns, driveway surfaces, and available mounting space help establish what can be retained and what needs preparation. Support requirements depend on the gate and the site.
- The complete scope. We discuss the gate design, materials, hardware, finish, and any operator or access controls. Site preparation and electrical work need to be identified before scheduling.
- Installation and operation. The work includes fitting and aligning the gate and checking its movement and hardware. For an automated installation, the operator, controls, and applicable safety devices also need setup and testing.
Before fabrication, confirm any property-specific permit or HOA requirements and who will handle them. The approval requirements and installation schedule should be established for your address.
What affects the gate installation quote?
The visible panel is one part of the cost. Opening size, gate movement, material, finish, supports, and site preparation all affect the work. Automation adds equipment, power and wiring requirements, entry controls, and safety devices suited to the installation.
When comparing proposals, check whether each includes removal of an old gate, changes to posts or concrete, electrical work, automation, and finish treatment. Two quotes for the same opening may cover different scopes.
If you already have a gate, a new installation may not be necessary. Our gate repair service covers problems with the existing gate and its operating equipment.
Gate installation questions
Can you install a new gate without replacing the entire fence?
That may be possible if the adjoining fence and entrance can accommodate the new gate. The gate supports need their own assessment; an existing fence post is not automatically suitable for the load. Photos of both sides of the opening help us understand the starting point.
Can I install a manual gate now and automate it later?
Potentially. Tell us that plan before the gate is built so its construction, mounting arrangement, power route, and space for operating and safety equipment can be considered. Adding an opener later depends on the suitability of the completed gate.
How long will the installation take?
Lead time and time on site depend on the design, fabrication, material and equipment availability, preparation work, and any required approvals. Ask for a schedule tied to the agreed scope, including arrangements for access while the entrance is being worked on.
What should I send when requesting a quote?
Include your city, photos of the entrance and adjoining fence, an approximate opening width if available, and whether you want manual or automatic operation. Mention any existing gate to remove and the vehicles that regularly use the entrance. Final dimensions need to be confirmed on site.
Discuss your gate installation in DFW
Star Gate & Fence serves Dallas–Fort Worth, including Dallas and McKinney. Check our service areas or contact us with your address to confirm coverage and scheduling.
Call (469) 778-0871, request a gate installation quote, or send entrance photos to info@stargateandfence.com.