Gate and Fence Contractor in Prosper

With Prosper’s sightline rules guiding placement, our direct employees install and repair gates, fences and outdoor structures.

Prosper requires permits for concrete flatwork, so driveway and gate-pad work belongs in the approval plan. We install automatic and custom iron gates, repair gates, and build wood, vinyl, iron and chain link fences. Concrete and carport construction can be included in the scope.

Every job uses our direct employees, never subcontractors. Founder Elia Amiel works in the field. We follow the one-third depth rule for concrete footings to resist movement where expansive black clay can cause support failure. Gate construction and operator safety are planned for ASTM F2200 and UL 325 compliance.

Request a site visit See our projects

Site Conditions Shape the Layout

Visibility controls where a fence or entrance can sit. The Town’s intersection visibility limits apply to nearby walls and landscaping as well as fencing. We check the proposed fence line and gate position against those sightlines before settling the layout. Plan for this review when an entrance meets an alley or street.

Gentle Creek and Willow Ridge appear in the Town’s residential planned-development records under separate approvals. For a property in either community, the applicable plan, plat and restrictions belong in the project review. An existing fence is a useful reference for measurement, but we still check the proposed replacement against the property’s requirements.

We assess soil and drainage at the actual post locations. Where expansive black clay is present, moisture-driven movement can heave shallow supports and disturb gate alignment. Our concrete footing work follows the one-third depth rule, with site conditions considered before excavation.

Gate, Fence and Concrete Services

Automatic Gate Installation

We build automatic and custom iron gates with the operator, controls and safety devices planned together for ASTM F2200 and UL 325 compliance. Local electrical permit requirements make the power supply part of the initial scope. For shared entrances, our commercial and HOA automatic gate systems also account for how vehicles enter and exit.

Gate and Operator Repair

We inspect gate movement, supports and powered operation before defining a repair. The scope distinguishes mechanical repairs from changes to electrical installations or circuits, which require permits here. Our gate repair work addresses the gate itself as well as related operating problems. If supporting fence replacement is needed, we check its length and materials against the permit exception.

Sliding Gate Installation

A sliding entrance needs room beside the opening for the moving panel. We check that travel space, driveway grade and the proposed support locations before choosing the layout. At street, alley and driveway intersections, the local visibility rule also shapes placement. Our sliding gate installation scope connects those measurements with the operator and supporting concrete work.

Wood Fence Installation

We define the fence run, openings, posts, rails and boards in the written scope. Here, replacing a short section still requires a permit unless it falls below 16 linear feet and uses like materials. That makes replacement length and material choice approval decisions as well as construction decisions. Applicable HOA requirements should be reviewed before the design is finalized.

Wrought Iron Fence Installation

We plan iron fencing around the boundary, pedestrian openings and vehicle entrance. An open fence design still needs review against the Town’s intersection visibility rule; material choice alone does not resolve placement. We check adjoining walls and landscaping during layout so the proposed fence is considered with other features that could obstruct a driver’s view.

Concrete and Hardscaping

We include driveway work and gate pads in the concrete permit scope. The Town lists concrete flatwork as permit-required, while landscaping items such as pavers and French drains are listed as not requiring a homeowner permit. We separate those portions of a combined project and check drainage paths and entrance clearance before establishing the finished layout.

Approvals Come Before Covered Work

The Building Inspections Division handles permits. Applications, inspection requests and payments go through Prosper’s Citizens Self-Service Portal. Fences and flatwork follow the minor-permit route, with a five-business-day review target, not a construction schedule. The Town requires hired contractors to obtain permits for their work and be registered with the Town. We prepare paperwork and schedule inspections.

Under the homeowner permit requirements, fencing needs a permit unless replacement is under 16 linear feet using like materials. Concrete flatwork and electrical installations and circuits also require permits. We distinguish hardwired operator circuits from qualifying exempt low-voltage work. The Town’s approval guidance also calls for separate deed-restriction and HOA review; applicable covenants may supersede Town requirements. Obtain required architectural approval before submission or construction.

Permits issued by: Building Inspections Division

How we build in Prosper

The same engineering standards apply on every job, whatever the property.

Direct employeesOur own crews set every post, pour every footing and wire every operator. We never use subcontractors.
Footings to depthStructural posts go into concrete to the one-third depth rule, so expansive clay cannot heave them out of line.
Safety standardsAutomated gates are built to ASTM F2200 geometry and wired to UL 325, with sensors tested before handover.

The Scope Guides Each Step

We carry the approved layout through excavation, installation and operational checks.

Assess the site, measure openings and check intersection visibility during the first visit.
Arrange utility locating before digging, then review marked areas against proposed footing locations.
Write the scope, identify required permits and assemble applicable HOA paperwork.
Install with direct employees, setting concrete footings to the one-third depth rule.
Walk through completed work and test gate travel, controls and safety sensors where installed.

Where we work in Prosper

Gentle Creek, Willow Ridge, Cedar Ridge, Whispering Farms, La Cima, Lakes of Prosper

Nearby cities we also serve

Frisco, McKinney, Allen, Plano, Carrollton, Celina

What affects the cost in Prosper

For Prosper work, the scope can include separate fence, concrete and electrical approvals. Gate width, fence length, material selection and the amount of supporting work affect the estimate. A gate installed with a new pad and operator circuit has a different scope from a repair that retains those components. We identify those distinctions in writing.

Access for excavation and material handling also matters. We check existing posts, hinges, concrete and operator equipment before deciding what can remain. Property-specific plans and HOA restrictions can change the proposed material or layout, so reviewing those documents before finalizing the scope helps avoid estimating a design that needs revision.

Questions from Prosper property owners

Does a small fence replacement need a permit?

Fencing requires a permit unless the replacement is under 16 linear feet and uses like materials. Both conditions matter when defining a small repair. We measure the affected run and identify the replacement material before determining the permit scope. Applicable HOA or deed restrictions also need separate review.

Can my fence block visibility beside the driveway?

Fences, walls, screens, mounding and landscaping 30 inches or higher cannot obstruct driver visibility at street, alley or driveway intersections. We review the entrance and adjoining features together before fixing the fence line. Plan for that check even when the proposed work follows an existing boundary.

Does Town approval also cover my HOA requirements?

Town approval does not replace deed-restriction or HOA review, and HOA covenants may supersede Town requirements. Bring the applicable architectural rules and property documents into the planning stage. We use those requirements when preparing the scope, so materials and layout can be reviewed before permit submission or construction.

Does every gate access component require an electrical permit?

Electrical installations and circuits require permits. Qualifying low-voltage work under 25 volts and 50 watts is exempt under the Town’s homeowner requirements. We separate the operator’s power supply from access-control components in the scope, then identify which portions need approval rather than treating the entire gate system as exempt.

Start Your Prosper Gate or Fence Project

With Prosper’s fence permit threshold in mind, send your location and gate width or fence length so we can assess the site and quote in writing.

Contact Star Gate And Fence See our projects

Gates Fences Gate Repair Gate Installation Outdoor Construction Carports